Madadm-notes
Jump to navigation
Jump to search
All the damn details of mdadm that you can never remember when a !@#$!#@ drive dies
Changing partition types
sfdisk can mirror two disks (usually) so that you can rebuild quickly..
there are ways to do this as a single command with pipes, but it sucks and does not always create the partitions correctly..
safer way: (Assuming sdb is toast)
- sfdisk -d /dev/sda > sda.out
- sfdisk /dev/sdb < sda.out
- sfdisk -l
Quick and dirty, change drive letter as needed:
- sudo mdadm --create --verbose /dev/md0 --level=1 --raid-devices=2 /dev/sda /dev/sdb
- cat /proc/mdstat (wait until synced)
- sudo mkfs.ext4 -F /dev/md0
- sudo mkdir -p /mnt/md0
- sudo mount /dev/md0 /mnt/md0
- df -h -x devtmpfs -x tmpfs
- sudo mdadm --detail --scan | sudo tee -a /etc/mdadm/mdadm.conf
- sudo update-initramfs -u
- echo '/dev/md0 /mnt/md0 ext4 defaults,nofail,discard 0 0' | sudo tee -a /etc/fstab